Basic detectors

CE basic detectors are the universal devices for the field work. Against the starter more features are included.










CDB101 R3
Heterodye stereo receiver, 15-130kHz adjustable, 2x8-digit LCD-display, Volume-Control, Hi/Lo Line-Out, Headphone out, black

The HD-detector with LCD-display.
Equipped with two high quality backelectret microphone in 90° angle the CDB101 stereo will show you some special experiences in observing the fast hunters. The CDB101 stereo is a heterodyne detector. The observed frequency is shown on a 2x8 digit LCD-Display with a resolution of 100Hz. Now included is a batteriemonitor wich is shown on the second line of the display. Because of the design of the de-centered knobs, you can use it in single-hand-use quite as comfortable as with both hands. The headphone/line-out is connected via a 3,5 mm jack.

129,95 Euro

Printerfriendly Datasheet




CDB103 R3
Heterodye stereo receiver, 15-130kHz adjustable, 3-digit LED-display, Volume-Control, Hi/Lo Line-Out, Headphone out, black

The CDB 103 R3 ist a heterodyne receiver with 2 integrated electret-microphones, wich will make bat-walking a really special experience. The 3 digit LED-display shows the dialed frequency with a resolution of 1kHz, with the internal speaker small groups can listen on a bat-walk. The connection are stereo headphones and line-out, both with a 3,5mm jack.  

99,95 Euro

Printerfriendly Datasheet




CDB305 R2
Dual (HD/FD) Receiver, 18-120kHz adjustable, Volume-Control, Headphone out

The dual-detector for the beginner. In FD-mode you can easily check if there is any bat out there by observing the whole frequency range from 20 to 120kHz, in HD-mode you can identify the species by tuning in the frequency on the printed scale. You can easily switch between both modes, with the internal speaker your whole family can enjoy bat-sounds. If you use the headphone, the internal speaker will be shut off. Headphone connector is 3,5mm jack.

99,95 Euro

Printerfriendly Datasheet





A lightweight headphone is always included. Powersupply 9V battery (not included)*.
Design changes for technical improvement possible.

*Please use ONLY alcaline batteries or NIMh-rechargeables with min. 8,4 volts.

Copyright 2006-2008 Ciel-electronique / Frank Walter / Webmaster info@ciel-electronique.de